1000+ Products can connect all servers uner front-end switch connecting methods: Telecom or Unicom fiber-optic connect to 1000+ incoming port, and then 1000+ outgoing port connectes to the lower deck Gigabit switch using fiber optic line, the host protected of the can be placed under the lower gigabit switches.

The installation steps are as follows:

a) Connect the data port, connect the WAN network cable (data entry line) to the firewall port marked as "entry", the corresponding LAN network cable (data qualify) connect to the firewall port marked as "exit";

b) connect management interface of firewall. any one identified as "management port" can be connected to inner or outer exchange;

c) start the firewall, connect the power cord and start the power switch, check all wiring port if their flashing lights are in working order;

d) log in to management machine, change the IP address to be the same as the firewall management network segment, and then log onto the management interface to ensure that normal access;

e) Check the traffic to confirm the normal passage, complete the installation.

Network structure in Figure: